Willkommen bei Shandong Ruier Seal Co., Ltd.

Shandong Ruier Seal Co., Ltd.

rufen sie uns an
+86 17686867693

fall
case zu hause > case
Application of oil tanker seals
  • Application of oil tanker seals
  • Application of oil tanker seals

Application of oil tanker seals

Oil tanker Seals (seals) are also used in bagged goods tied seal, tank containers blockade, railway freight cars blockade, etc., the lock body from aluminum alloy die-casting.
Oil tanker Seals (seals) used once can not be used for the second time, like this one-time oil tanker seals (Seals) The greatest advantage is to protect the safety of goods, there is no person to move the oil tanker Seals (seals) A look at the know, the tanker seals (seals) can also be used in the postal parcel car, trailer container truck on these vehicles.
Oil tanker Seals (seals) are also used in bagged goods tied seal, tank containers blockade, railway freight cars blockade, etc., the lock body from aluminum alloy die-casting.
The scope of application can be adjusted freely and tight. The main advantages of oil tanker seals (seals) are corrosion resistance, high temperature resistance, high pressure resistance and wear resistance.

CABLE SEAL
Application skills of seals in tanker
1. After the oil unloading, the gas station on the tanker tank on the metering port and unloading port, handle place to make the seal, so that the connection is close, to prevent the trip too large to create an opportunity.
2. Tanker arrival must be on the unloading port, unloading handle and the tanker unloading handle PIN's seal number to check to confirm whether and the sealing voucher and permanent seal number table on the seal number consistent, seal is intact.
3. After confirming the seal intact and the number consistent, the gas station can destroy the unloading port and the handle of the seal, normal unloading oil, and the pin at the seal as a permanent seal can only be inspected and protected, can not be damaged.
4. Inspectors found that under the oil depot to carry out the restrictions on oil, only option two to transform. The renovation of the tanker inspection, confirmation, and the application of the seal, record handle pin seal number in the subsequent inspection, but also found that many vehicles behind the box board space is very large, there is still the possibility of stealing oil. Then the structure of the tanker was studied, and two sets of rectification plans were developed.
5. At the unloading port of tanker, add and unload the oil mouth cover, and make the seal.
6. In the body punching, at the same time at the unloading handle hole, through the seal to make the handle and the body connected together, can prevent the start of oil unloading handle.